HomeFAQSearchMemberlistUsergroupsRegisterLog in

Share | 

 Heng Long ESC spec/manual

Go down 

Posts : 272
Join date : 2008-10-15
Location : Penang/Kedah

PostSubject: Heng Long ESC spec/manual   Sun Nov 16, 2008 11:02 am

1.High frequency drive system.
2.Foward,reverse and brake opoerations are all linear.
3.Reverse operation cancellation function.
4.Overcurrent protection function.
4.Low-voltage protection.
5.Power left alarm fuction.
6.abnormal input signal cancellation function.
7.Checker function(LED display,audible beep sound.

Applicable Motors
1.Use the HLS-06 with a motor with 15T or more turn.
2.If the motor with number ofturns smallerthan the above
is use,the heat protectorand overcurrent protection circuit may operate and other condition above is satisfied.

Technical Data
1.Operaton system forward,reverse and brake.
2.Power requirement:- NIMH battery 4-6 cells
3.Current capacity(FET rating): Foward=300A(320A),Reverse=260A(280A)
4.Current supply-3A.
5.Fail safe enabled
6.Low voltage and overcurrent protection.
Back to top Go down
View user profile http://prcdt.forumotion.com
Heng Long ESC spec/manual
Back to top 
Page 1 of 1
 Similar topics
» [HOW-TO VIDEO] How to convert Heng Long German Tiger 1 pro airsoft RC tank for Infrared battle: IR Conversion
» Boolean21's Heng Long German Leopard 2A6 - 1/16 scale
» Marpek's HL Leopard 2a6
» WTS: 1/16 Tank (Heng Long M41A3 BULLDOG)
» Lt1 long crank?

Permissions in this forum:You cannot reply to topics in this forum
Penang RC Drift Team :: R/C Drift Information :: Manuals-
Jump to: